Адрес поменяйте пожалуйста. Тут у многих аллергия на ССр
Уточните модель двигателя
4.3L EFI ALPHA
4.3L EFI BRAVO MODELS
4.3L EFI ENGINES
1. Свечи сухие ?
 |
Цитата: |
 |
|
|
|
|
|
|
|
|
|
поменял крышку распределителя |
|
 |
|
 |
|
Зазор выставили
Там есть момент при замене
|
|
Цитата: |
|
|
|
|
|
|
|
|
|
|
1. Put 2 drops of Loctite 27131 into the rotor so it lands on the locating key.
2. Put 2 drops of Loctite 27131 in keyway on upper portion of distributor shaft.
3. Immediately install rotor assembly onto distributor shaft. Make sure rotor locating key
is aligned with keyway in distributor shaft before pressing rotor all the way down on the
shaft, until it stops, with the palm of your hand. Let Loctite cure overnight with distributor
in inverted position.
4. The rotor should fit very tight. It may be necessary to heat rotor with torch lamp to
properly install. It is important not to let any Loctite run down distributor shaft. Loctite
could get into top distributor housing bushing.
5. Reinstall distributor cap on distributor.
6. Install spark plug wires (if removed). |
|
|
|
|
|
|
|
|
Цитата: |
|
|
|
|
|
|
|
|
|
|
1. Use a magnifying glass and light to inspect the two metal “jumper leads” for cracks. If
a crack is found in either metal “jumper lead,” install a new sensor. |
|
|
|
|
|
|
а-Jumper Leads